해외배송 상품으로 납기 5~7일정도 소요되는 제품입니다!!

INTRODUCTION

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface and the Xbee interface is deisgned to facilitate the realization of wireless rocker button controller. The shield can be easily stacked on top of your Arduino boards. It can also connect with OLED2864 & OLED9664.

FEATURES

Dual axis mini joystick 

Connects to your Arduino using male to male pin headers

Comes with 2 colored push buttons

The use of imported high-quality potentiometers and the PS button rocker. The rocker output an analog signal is to achieve vertical and horizontal control, which is attached to four keys at the same time. It also has two great circle button caps (cap color random round keys), a rocker button and a reset button.

The use of stack design is so that the plug can easily on Arduino Duemilanove or DFRduino Romeo.

The reserved APC220/Bluetooth module interface is to facilitate the realization of wireless rocker button controller.

The remaining unused ports are extended out of standby.

SPECIFICATION

up             D8

down           A1

left           D9

right          D12

stick button   A0

level_stick    A3

vertical_stick A2

width    53.2 mm

length   121.3 mm

height   40.8 mm (with pin); 31.2 mm (without pin)